RSCI 180-300 Overrunning Clutch Bearing Gearbox Clutch

Working time: From 8:00 a.m. to 10:00 p.m

Centimeter Equipment Trading Company Limited

Hotline: 0907030784

Deep groove ball bearing

Home|Product|Deep groove ball bearing

Deep groove ball bearing

RSCI 180-300 Overrunning Clutch Bearing Gearbox Clutch

Product information

Feature

Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling.
Primarily designed as a backstop, this type can be also used as an overrunning clutch in crawl drives, where the overrunning speed is high but the driving speed is low and does not exceed the maximum driving speed shown in the table. Centering of the outer race must use the inner bore.The centering spigot must not contact the sprag cage. Please refer to page 76 (RSCI 20-130) for further information.

Size	Torque	Speeds				Number				Weight
dH7	TKN1)	nmax2)	nimin3)	nimax4)	D5)	z	L	m	tmin
[mm]	[Nm]	[min-1 ]	[min-1 ]	[min-1 ]	[mm]		[mm]	[mm]	[mm]	[kg]
180	31500	115	285	1300	412	12	90	18.6	3	59
180M	50000	90	220	1300	422	18	120	18.5	2	92
180 II	63000	115	285	1300	412	24	160	21	3	116
180 II-M	100000	90	220	1300	425	24	240	32	3	190
220	42500	110	265	1100	470	16	105	19.5	3	90
220M	68000	85	205	1100	480	16	120	18.5	2	109
220 II	85000	110	265	1100	480	18	160	15	3	159
220 II-M	136000	85	205	1100	490	20	240	32	2	249
240	52000	105	250	1100	500	16	105	15	2	95
240 M	83000	80	195	1100	520	16	120	18.5	2	137
240 II	104000	105	250	1100	520	24	180	24	2	191
240 II-M	166000	80	195	1100	530	24	240	32	2	250
260	65000	100	240	1000	550	16	105	22.5	2	130
260M	100000	75	185	1000	580	24	125	21	2	183
260 II	130000	100	240	1000	580	24	210	39	2	262
260 II-M	200000	75	185	1000	580	24	250	37	2	369
300	78000	90	225	1000	630	24	105	22.5	3	174
300M	125000	70	175	1000	630	24	125	21	3	210
300 II	156000	90	225	1000	630	24	210	38	3	351
300 II-M	250000	70	175	1000	630	24	250	33.7	3	457