Radial Spherical Plain Bearings 

■ are complete units comprising inner rings and outer rings with a steel/steel or steel/bronze sliding contact surface . 

 the inner ring has a cylindrical bore and a convex outer slide way the outer ring has a cylindrical outside surface and concave inner slideway.

From d = 320 mm, the outer ring is split at two points and held together by retaining rings

■ can support radial loads

■ can transmit motion and loads with low moment levels

– they can thus keep bending stresses away from the adjacent structure

■ are particularly suitable for alternating loads with impact type and shock type stresses

■ can support axial loads in both directions

■ are lubricated via the outer and inner ring

– with exceptions (dimensions)

– under alternating load, one side is relieved.

Technical Data